盗墓笔记小说,《完美世界》txt全集

Description: The mill is cylinder rotating device with girth gear and two chambers. The materials are fed to first chamber through hollow shaft through feeding device. There is stepped liner or waves liners and different size of balls inside this chamber. After finishing in first chamber, the materials will be fed to second chamber. There is flat liners and balls inside second chamber, which will grind the materials once again. After grinding, the powder will be discharged and then finish grinding works.

Shell
This ball mill is horizontal shell rotating device, mainly consist of shell, mill door and liner bolts. So we required to check the mill when shut down, especially to check the liners on shell and mill door.
Liner
The liners are used for protect shell in order to avoid damage to shell, please check liners regularly to avoid any loose because of bolts etc.
Diaphragm
Diaphragm is used to separate grinding media to avoid axial movement of media and large size move to next chamber. It can make suitable grinding for materials and control filling grade, material flow, and grinding speed inside mill.
Diaphragm plate is consist of central circle, feed cone, grate plate, lifting plate, liner, diaphragm support and blind plate. Please check if there is any loose, missing of bolts, to check the condition of grate plate and blind plate, if there is any crack or influence to grate plate and check if there is any movement of balls.
Main bearing
Bearing is used to bear the weight of rotated part also impact of grinding media. The mill is supported on main bearing by hollow shaft. There is bearing cover, watch hole, temperature gauge on bearing housing.
Feeding and discharging device
Feeding device is used to feed materials into mill, there is chute feeding device, screw feeding device and ladle feeding device. The discharging device is consist of discharging grate plate, guide cone, lifting plate, discharging cylinder, drive connecting tube,drum screen, discharging cover, coarse tube etc.
Drive device
Drive device is consist of speed motor, slow drive motor, slow reducer and speed reducer. Mainly check: if there is any overheat and noise of reducer oil pump. And check working condition of each elements such as pressure gauge, temperature gauge, and if there is any oil leakage, oil level and oil color of oil tank. Please adjust oil flow as per weather condition; check if there is any noise of main oil pump etc.

Specification (Diameter*Length)	Rotating speed（r/min）	Feed size(mm)	Capacity	Load of grinding media (t)	Main motor			Main Reducer		Weight （t）
Specification (Diameter*Length)	Rotating speed（r/min）	Feed size(mm)	Capacity	Load of grinding media (t)	型號 Model	Power (kw)	Speed (r.p.m)	Model	Speed ratio	Weight （t）
Φ2.2×11	22.2	≤25	15～17	50	JR1512-8	570	740	ZD80	5	83
Φ2.4×8	20.91	≤25	14～18	39.5-42	JR1512-8	570	740	ZD80	5	76.4
Φ2.4×9	20.91	≤25	23~25圈	50	JR1512-8	570	740	ZD80	5	81
Φ2.4×10	20.91	≤25	開16~18	50	TR1512-8	630	740	ZD80	5	92.4
Φ2.4×11	21	≤25	開17~19 圈20~22	60~62	YR710-8/1180	710	740	JDX630	5.6	105
Φ2.4×12	21	≤25	開18~20 圈22~24	63~65	YR800-8/1180	800	740	MBY710	6.3	110
Φ2.4×13	21	≤25	開21~22 圈24~26	66~68	YR800-8/1180	800	740	MBY710	6.3	117
Φ2.6×10	20.6	≤25	21~24	64	YR800-8/1180	800	740	JDX710	6.3	133
Φ2.6×11	20.6	≤25	21~28	69	YR800-8/1180	800	740	JDX710	6.3	140
Φ2.6×13	20.6	≤25	28~31	80	YR1000-8/1180	1000	740	JDX800	6.3	151
Φ3.0×9	19.3	≤25	35~40(圈)	80~83	YR1000-8/1180	1000	740	MBY800	7.1	137
Φ3×11	18.92	≤25	44~47(圈)	95~100	YR1250-8/1430	1250	740	JDX900	7.1	159
Φ3×12	18.92	≤25	48~52(圈)	103	YR1250-8/1430	1250	740	JDX900	7.1	164
Φ3×13	18.92	≤25	39~45(圈)	110~116	YR1400-8/1430	1400	740	JDX900	7.1	183
Φ3.2×11	18.3	≤25	45~48(圈)	110~112	YR1400-8/1430	1400	740	JDX900	7.1	195.5
Φ3.2×13	18.7	≤25	45~50(開)	125	YR1600-8/1430	1600	740	JDX1000	7.15	213
Φ3.4×11	18	≤25	45~55(圈)	115	YR1600-8/1430	1600	740	JDX1000	7.15	201
Φ3.5×13 中心傳動	17	≤25	50~55	150	YR2000-8/1730	2000	740	JS130-A-F1		223
Φ3.5×13 邊緣傳動	17.5	≤25	50~60	150	YR2000-8/1730	2000	740	JDX1000	6.3	240.5
Φ3.8×13 主軸承式	16.3	≤25	65~70	185	YR2500-8/1730	2500	740	JS130-C-F1		240
Φ3.8×13 焊接滑履	16.3	≤25	65~70	185	YR2500-8/1730	2500	740	JS130-C-F1		220
Φ4×13	16.3	≤25	78~80	191	YRKK900	2800	745	JS140-A		220
Φ4.2×11 Main Bearing	15.6	≤2	120~140	190	YR2800-8/1730	2800	740	JS140-A-F1D		245
Φ4.2×13 Main Bearing	15.6	≤2	140~155	225	YRKK1000-8	33500	740	JS150-A		260
Φ4.2×13 Slide Shoe (Center)	15.6	≤2	140~155	225	YRKK1000-8	3550	740	JS150-A		280
Φ4.2×13 焊接滑履	15.6	≤2	140~155	225	YRKK1000-8	3550	740	JS150-B		260
Φ4.6×13.5 焊接滑履	14.5	≤25	140	280	YRKK1000-6	4500	995			365
Φ4.6×14	14.5	≤25	145	285	YR1000-6	4500	995			372
Φ5.0×15	14	≤25	160~165	350	YRKK1000-8	6000	740			420

Equipment